What’s the difference between hot rolled and cold rolled steel?
It’s important to note that the main difference between hot rolled and cold rolled steel is one of process. “Hot rolling” refers to processing done with heat. “Cold rolling” refers to processes done at or near room temperature. Although these techniques affect overall performance and application, they should not be confused with formal specifications and grades of steel, which relate to metallurgical composition and performance ratings. Steels of different grades and specifications can be either hot rolled or cold rolled—including both basic carbon steels and other alloy steels.
It may seem obvious, but some types of steel are better suited for certain applications. Knowing which to use can help avoid over-spending on raw materials. It can also save time and money on additional processing. Understanding the differences between hot and cold steel is integral to choosing one over the other.
Hot rolled steel
Hot rolled steel is steel that has been roll-pressed at very high temperatures.
Hot rolled steel is steel that has been roll-pressed at very high temperatures—over 1,700˚F, which is above the re-crystallization temperature for most steels. This makes the steel easier to form, and resulting in products that are easier to work with.
To process hot rolled steel, manufacturers first start with a large, rectangular length of metal, called a billet. The billet is heated and then sent for pre-processing, where it is flattened into a large roll. From there, it is kept at a high temperature and run through a series of rollers to achieve its finished dimensions. The white-hot strands of steel are pushed through the rollers at high speeds. For sheet metal, rolled steel is spun into coils and left to cool. For other forms, such as bars or plates, materials are sectioned and packaged.
Steel shrinks slightly as it cools. Since hot rolled steel is cooled after processing, there is less control over its final shape, making it less suitable for precision applications. Hot rolled steel is often used in applications where minutely specific dimensions aren’t crucial. Railroad tracks and construction projects often use hot rolled steel.
Hot rolled steel can often be identified by the following characteristics:
- A scaled surface—a remnant of cooling from extreme temperatures
- Slightly rounded edges and corners for bar and plate products (due to shrinkage and less precise finishing)
- Slight distortions, where cooling may result in slightly trapezoidal forms, as opposed to perfectly squared angles
What are the benefits of hot rolled steel?
Hot rolled steel typically requires much less processing than cold rolled steel, which makes it a lot cheaper. Because hot rolled steel is allowed to cool at room temperature, it’s essentially normalized—meaning it’s free from internal stresses that can arise from quenching or work-hardening processes.
Hot rolled steel is ideal where dimensional tolerances aren’t as important as overall material strength, and where surface finish isn’t a key concern. Where surface finish is a concern, scaling can be removed by grinding, sand blasting, or acid-bath pickling. Once scaling has been removed, various brush or mirror finishes can also be applied. Descaled steel also offers a better surface for painting and other surface coatings.
Cold rolled steel
Cold working is a metal forming method that has many advantages over hot working. Technically, cold working includes cold rolling and cold drawing. The former is a process used with sheet metal. The latter finds use with rectangular and round bars.
Cold Rolling Method
As opposed to hot rolling, cold rolling occurs with the metal below its temperature of recrystallisation. This is still only half the truth. The whole process starts out like hot rolling to give the initial shape without much resistance. After that, the metal is left to cool at room temperature.
The half-products are then fed to cold reduction mills. The metal is rolled to the thickness of 0.5…3 mm in case of mild steel and 0.5…5 mm in case of stainless steel. The material is cooled by the use of oil which also acts as a lubricant during the rolling process. As the metal sheet gets thinner between the rolls, its speed increases. That would mean material wear and deformation if an oil film wasn’t there to minimise the contact. Therefore, cold rolled steel is identifiable by an oily and smooth surface.
As the working takes place in temperatures below the rescrystallisation temperature, strain hardening occurs. The rolls induce plastic deformation. Thus, the yield strength of cold rolled steel is higher than that of hot rolled steel. As an example, a hot rolled steel product may have a yield strength of 235 MPa. In comparison, a cold rolled steel product with the same chemical composition has a yield strength of 365 MPa.
The main advantages of cold working are:
- Accurate finished dimensions
- Clean surface
- Greater strength properties
Cold Rolled Steel Uses
Cold drawn seamless tubes are a good fit for furniture Although cold rolled steel is more expensive than hot rolled steel, the aforementioned advantages make it useful for many applications. The finished products need less additional surface finishing to achieve a good result, as the surfaces are already smooth. Examples of cold rolled/cold drawn steel uses include:
- Metal furniture
- Structural parts
- Home appliances
- Water heaters
- Metal containers
- Fan blades
- Frying pans
- Computer cabinets
When choosing the right material for your product, make sure to understand the difference of these two material manufacturing methods. There is no point in spending more money on something you don’t actually need. Therefore, hot rolled steel is the better choice when the demands aren’t high. Otherwise, go with cold rolled steel. It has the answers that hot rolled steel doesn’t.

